# Show total amount on pole display when 'settle' is clicked on Pos screen **URL:** \ **Category:** V4 Question\ **Created:** [August 31, 2015, 7:47am UTC](https://forum.sambapos.com/t/show-total-amount-on-pole-display-when-settle-is-clicked-on-pos-screen/6776 "2015-08-31T07:47:47Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![JTRTech](https://forum.sambapos.com/user_avatar/forum.sambapos.com/jtrtech/32/21270_2.png) [@JTRTech](https://forum.sambapos.com/u/JTRTech)\ **Post date:** [September 1, 2015, 12:53pm UTC](https://forum.sambapos.com/t/show-total-amount-on-pole-display-when-settle-is-clicked-on-pos-screen/6776/6 "2015-09-01T12:53:40Z")
@Thala FYI **markjw** is taking a closer look at your model of pole display, seems you might have difficulties, follow his new topic on this 😄 > [@Port Printer appears to be fixed at 9600 baud](http://forum.sambapos.com/t/port-printer-appears-to-be-fixed-at-9600-baud/6801): > > I am testing a customer display based on a question someone had on the forum. It is an LED8 display I had lying around and as someone asked, I thought I was just see if I can get SambaPOS to work with it. I can get it working fine via command prompt. The customer display comes on at 2400 baud, even it can be set to 9600, it goes back to 2400 when powered on again. So I have tried setting Windows settings for the COM port (COM2 in my case) to 2400, but SambaPOS won’t send to it. If I send a … --- _[View the full topic](https://forum.sambapos.com/t/show-total-amount-on-pole-display-when-settle-is-clicked-on-pos-screen/6776)._