Hi every body ,
Is my first post on thr form and I think it will not be the last .
I just purchased Pos and I found SambaPos not that bad to implemented for one of my client . ( I’m using for the moment the trila version to check the viability of the product and is look wonderful)
so I went all around with issue based on that forum that was very helpfull , but I got stuck now with the scale weight integration.
1- I have CAS ER Jr scale and I followed all the procedurefor local settings…device …etc COM…see attached.
I know which port is connected to …as explained previously I have right connection with the scale checked by Putty program please see above screen shot.
The problem is that Samba doesn’t display the weight .
Thats really odd. I haven’t messed with scales and it seems like you have everything set correctly. I’m assuming you aren’t running Putty the same time SambaPOS is open. If not, close Putty down and logout/login of Samba.
Right. I was talking about the Putty connection settings, but I’m assuming its on COM1 based on the header. I know you need a product multiplier of 1000, but I’m not sure that would cause issues from it displaying the weight in the keyboard. Check out
Nice. It seems like that shouldn’t be needed if you’re using the Case ER Jr and not another type of scale, since I’m assuming the output pattern is preloaded, but sometimes whatever works is good enough.